Asset recording

About these standards

These standards provide our requirements for capturing data and information that is used for:

identifying assets and spatial location
benchmarking asset performance
planning maintenance
upgrading infrastructure and renewal planning
health, safety and environmental management
sharing information.

Click name of standard to download PDF.

Asset recording

Doc no.	Name	Revision no.	Revision date	Description
AI-01	As-built and GIS data for pipelines and structures	1.2	17/03/2016	Data required for new pipelines, structures and associated facilities.
AI-06	As-built and GIS data for networks and developments	1.3	04/10/2016	As-built data requirements for networks, new developments and subdivisions. This is a minimum requirement for as-builts. For more detailed requirements see A1-01.
AI-09	Asset type guideline	1	05/10/2015	Guideline for grouping asset types.
AI-04	CCTV inspection of construction works	1	01/10/2014	Covers inspection of newly constructed pipelines before they are put into service, and of existing pipelines before and after lining or other repairs, using CCTV and still digital camera images to directly inspect the internal surfaces of these structures.
AI-05	CCTV inspection of existing pipelines prior to other works (19)	1	01/10/2014	Covers inspection of existing sewer and stormwater pipelines before and after the construction of new sewers, watermains and other structures that cross them or are close to them.
AI-03	CCTV inspection of sewers and data collection (15)	1	01/10/2014	Covers the gathering of asset condition data from sewers, manholes and other structures, using CCTV and still digital camera images to directly inspect the internal surfaces of these structures. Does not include the inspection of newly constructed pipelines.
AI-02	Equipment labelling	1	01/10/2014	Provides a standard method of labelling equipment and pipework at Watercare facilities (excluding wiring and electrical equipment).
AI-07	Maintenance procedures uploading	1	01/10/2014	Information required and format for Watercare to add the maintenance tasks and procedures for new or replaced assets.
7363	Watercare CAD manual	8.1	03/07/2017	Standards and procedures for creating and registering AutoCAD drawings.

Asset data templates

These are the current standards. If you require a previous standard, please contact us.

Email: standards@water.co.nz
Phone: (09) 442 2222, press 4

Site map

Get in touch

Report a fault Send online enquiry Contact